Bf109f

Why not share your information on your latest creation
rob ellis
Posts: 124
Joined: July 28th, 2013, 11:35 am
Contact:

Bf109f

Postby rob ellis » October 10th, 2013, 11:24 am

Some time ago I put a wanted on the for sale section for a 109 I use to own,,,,I heard nothing & forgot all about it,,,, then a few months later I poped a call to kingfisher aviation regarding a ziroli p51 ,,,,, but I was told they only had a old tatty 109,,what they beleved to be a meister,,,,which turned out to be my old one,,,,a deal was done & I took it to dave clarke & he was kind enough to go through the complete airframe doing all the repairs & almost totally rebuilding the front of the wing,,, installing my da85 ,, making a new rudder,,, adding some servo hatches & generally doing everything needed to make it a flyer again,,,once it was ready to come home I could turn it into a F7 also i could then fit a cockpit & a more scale canopy as the one on it was a joke,,,,,& add some suface detail then repaint it in the star of afrikas markings,,,,HANS JOACHIM MARSEILLE....he had twelve 109s issued to him so this model would be one of the last F variants he had before the G variants he flew,,,, getiing over 100 victories in the 109,,,,,, on collecting a newly issued G gustav he had engine probs & elected to bail out ,, hitting the tail he was either knocked out or hit in the chest area & he never opened the parachute falling to his death,,
BIG THANKS TO DAVE CLARKE FOR ALL HIS HELP & SKILL SORTING THE MANY PROBLEMS OUT.
Attachments
c361.jpeg
c361.jpeg (64.26 KiB) Viewed 10659 times
0166.jpeg
0166.jpeg (65.88 KiB) Viewed 10659 times
7834.jpeg
7834.jpeg (52.52 KiB) Viewed 10659 times
1b84.jpeg
1b84.jpeg (55.96 KiB) Viewed 10659 times
Last edited by rob ellis on October 10th, 2013, 8:10 pm, edited 4 times in total.

User avatar
Jason Griffiths
Posts: 185
Joined: December 4th, 2008, 11:23 pm
Location: Lincolnshire
Contact:

Re: Bf109f

Postby Jason Griffiths » October 10th, 2013, 1:35 pm

Very nice Rob, there was 1 like that at the Nationals at Barkston this year and a stall.
Thanks 8-)

Ken Bones
Posts: 221
Joined: August 1st, 2012, 3:26 pm
Contact:

Re: Bf109f

Postby Ken Bones » October 10th, 2013, 5:30 pm

I have just about finished a 1/4 109 E, white 14. Another of Marsailles aircraft.
If I could get piccys on here I would show it.

Bonzey

rob ellis
Posts: 124
Joined: July 28th, 2013, 11:35 am
Contact:

Re: Bf109f

Postby rob ellis » October 10th, 2013, 5:47 pm

Was it the one stewart clfford had..? Have you got it on any other sites,,,, you could put a hyper link on here,,,,,ive always fancied an E in von werras colours,,,,,,, the one that got away......heres a few more picys
Attachments
426d.jpeg
426d.jpeg (33.84 KiB) Viewed 10572 times
62bd.jpeg
62bd.jpeg (33.28 KiB) Viewed 10570 times
fd0c.jpeg
fd0c.jpeg (38.44 KiB) Viewed 10567 times

Ken Bones
Posts: 221
Joined: August 1st, 2012, 3:26 pm
Contact:

Re: Bf109f

Postby Ken Bones » October 10th, 2013, 10:29 pm

It was one of the two that Fighter factory put together . He built the airframe for me more or less upto the covering stage. Still needed a lot of work to get it 109 shape though what with all the usual 109 lumps and bumps etc..
What power plant you using Rob?

Ken.

nickhenderson
Posts: 39
Joined: December 4th, 2008, 8:18 pm
Location: Cebu, Philippines
Contact:

Re: Bf109f

Postby nickhenderson » October 11th, 2013, 1:36 am

This may answer your question Mr Bones
wing,,, installing my da85 ,, making a

rob ellis
Posts: 124
Joined: July 28th, 2013, 11:35 am
Contact:

Re: Bf109f

Postby rob ellis » October 11th, 2013, 7:02 am

Ken,,, its a da85......it flew a 41 lb mustang with ease,,,, so im sure it will haul this 109 around ok,,,, although I use to fly this particular 109 on a 62,,,,,,,,, only down side is the motor poking out,,,,,, only way round that is electric,,,,,,, I did see yours on your face book through a mutual frend martin blysby the aviation artist,,,,, I must admit it looks superb.......you just need a early MK spit to chase it about with now,,,,
Rob

Ken Bones
Posts: 221
Joined: August 1st, 2012, 3:26 pm
Contact:

Re: Bf109f

Postby Ken Bones » October 11th, 2013, 10:13 am

Funny you say about the early Mk Spit, I have spoken to Mike Booth about converting my Mk 9 to a Mk 1 or 5.
My 109 E is having 3w70 fitted.

sean smith
Posts: 210
Joined: December 19th, 2008, 2:25 pm
Contact:

Re: Bf109f

Postby sean smith » October 11th, 2013, 12:55 pm

Looks like i've got some catching-up to do with my G10.
Attachments
109.jpg
109.jpg (77.07 KiB) Viewed 10477 times

rob ellis
Posts: 124
Joined: July 28th, 2013, 11:35 am
Contact:

Re: Bf109f

Postby rob ellis » October 11th, 2013, 3:05 pm

Sounds like a plan,,, as theres lots of mk9s about,,,,

rob ellis
Posts: 124
Joined: July 28th, 2013, 11:35 am
Contact:

Re: Bf109f

Postby rob ellis » October 11th, 2013, 3:08 pm

sean smith wrote:Looks like i've got some catching-up to do with my G10.


Looks nice,,,, what scheme will it be,,,,,, there was some awsome ones on the later G & K variants, ,, the longer tail wheel on the later ones was a big help to the novice pilots,,,, some having only had maybe two or three hours in a 109 before going on combat duty in the later months of the war.....

sean smith
Posts: 210
Joined: December 19th, 2008, 2:25 pm
Contact:

Re: Bf109f

Postby sean smith » October 11th, 2013, 4:30 pm

Hoping to go with something like this. Handy having a 1/24th scale kit for detailing and painting scheme lay out.
Attachments
IMG_2171-1.jpg
IMG_2171-1.jpg (59.84 KiB) Viewed 10434 times

rob ellis
Posts: 124
Joined: July 28th, 2013, 11:35 am
Contact:

Re: Bf109f

Postby rob ellis » October 11th, 2013, 6:08 pm

Thats a 24th scale kit? Is it trumpeter?

sean smith
Posts: 210
Joined: December 19th, 2008, 2:25 pm
Contact:

Re: Bf109f

Postby sean smith » October 11th, 2013, 9:12 pm

Yes, all the way from China. Try as i might i couldn't get one in the UK?

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: Bf109f

Postby Mike Booth » October 13th, 2013, 8:46 pm

Lovely work gents .
There has been a lack of 109s for a while.
Kens model looks superb and he has embellished the entire airframe with great detail.
I'm sure he will take the finished airframe to Gaydon .
It really is worth a look.

Richard scarbrough
Posts: 58
Joined: December 4th, 2008, 11:36 pm
Contact:

Re: Bf109f

Postby Richard scarbrough » October 25th, 2013, 6:32 pm

Hi Ken,
Maybe we can fly the two together? i know mine is a G, but hey ho!!!!
Richard.
Attachments
Me 109g 003.jpg
Me 109g 003.jpg (214.25 KiB) Viewed 10089 times

Ken Bones
Posts: 221
Joined: August 1st, 2012, 3:26 pm
Contact:

Re: Bf109f

Postby Ken Bones » October 25th, 2013, 9:50 pm

Great idea Richard, can't wait mate.
Mine is about done now with just the rx to fit and to set up the radio.. Come out at 35.5 lb all up, so happy with that.
Will be at Gaydon on Sunday for the first roll out since it has been finished.
Ken.


Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 26 guests