I'm hoping somebody out there can help us. We have two JR DSX9 transmitters which we want to connect together so they can be used as master and slave for training purposes. We know how to set up for transfering model data from one to the other, and setting up as "master" and "slave". Everything works okay, ailerons, which are mixed on ail and aux 2, rudder, throttles (Y lead), flaps (matchboxes), and landing gear. The only problem we have is the elevators, which are mixed on ele and aux 3, one goes up and the other goes down. Reversing the servo direction on the slave makes no difference.
The only difference between the two transmitters is the "master" is the Mk1 version and is Mode 2 and the "slave" is the Mk2 version and is Mode 1. We've checked all the settings in the system menus, ie stick mode and direction, and we've played about with settings in the "device select" and "wing type" menues. I'm convinced we are missing a trick somewhere so any advice would be gratefully received. Dave Jones.
