Wing joiner tube and socket

Need technical help on some problem? Let us know and we will see what we can do
Post Reply
Dave Linney
Posts: 2
Joined: January 11th, 2009, 1:11 pm
Contact:
Contact Dave Linney

Wing joiner tube and socket

Postby Dave Linney » January 11th, 2009, 1:19 pm

I am building a 1/4 scale Vampire and require 17in of wing joiner tube and socket. The outside diameter of the joiner to fit a hole in the ribs of 11/4in. Needless to say an American plan with all dimensions imperial. Does ayone know of a source that can supply these dimensions please chaps.
Top
Robin Woodhead
Posts: 70
Joined: December 3rd, 2008, 5:23 pm
Location: Nottingham
Contact:
Contact Robin Woodhead

Re: Wing joiner tube and socket

Postby Robin Woodhead » January 11th, 2009, 1:55 pm

Try Belair or Falcon Aviation, both supply Alum wing joiners and Phenolic matching tube.
Top
Phil Clark
Posts: 941
Joined: December 4th, 2008, 7:07 pm
Location: Chester-le-Street, Co Durham
Contact:
Contact Phil Clark

Re: Wing joiner tube and socket

Postby Phil Clark » January 11th, 2009, 11:14 pm

I recently used 'TNT Landing Gear' in the US for 2 sets of 'Imperial' sized tube sets for 2 customers projects.......excellent quality and excellent service.......

http://www.tntlandinggear.com/store/shop/wing_tubes.htm

Phil
Top
Dave Linney
Posts: 2
Joined: January 11th, 2009, 1:11 pm
Contact:
Contact Dave Linney

Re: Wing joiner tube and socket

Postby Dave Linney » January 12th, 2009, 10:13 am

Thanks Robin and Phil I will try your suggestions and let you know.
Regards,
Dave
Top
Post Reply

Return to “Technical Help required”

Who is online

Users browsing this forum: No registered users and 1 guest