102 inch Focke Wulf 190

Why not share your information on your latest creation
chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » October 6th, 2011, 9:16 pm

Inspired by Gregg and Mike I thought I had better get that Cowling done, and now onto the wing fairings.
Chris

SAM_1036.JPG
SAM_1036.JPG (61.94 KiB) Viewed 12012 times

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby Gregg Veasey » October 6th, 2011, 9:21 pm

hahahahahaha, clever!!! I get one of these too then! result!

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » October 6th, 2011, 9:32 pm

Tee Hee :D

Gregg Veasey
Posts: 339
Joined: December 4th, 2008, 9:46 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby Gregg Veasey » October 6th, 2011, 9:36 pm

its probably worth checking they work in mode 1 as well as mode 2 before you sell them!! ;)

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby Mike Booth » October 6th, 2011, 10:28 pm

Cor we've all been at it .
Something to chase next year Tiff old son.

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » October 7th, 2011, 6:24 am

Certainly Chockey, I may have to fit another tank then to pour on the smoke :D

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: 102 inch Focke Wulf 190

Postby stewart clifford » October 7th, 2011, 8:25 am

Gregg Veasey wrote:its probably worth checking they work in mode 1 as well as mode 2 before you sell them!! ;)


You'll be alright Gregg, it's German, therefore it's already left hand drive.

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » October 18th, 2011, 8:05 pm

Wing fairings now done, I shall be bringing this model to Gaydon on Sunday, all in primer with engine and retracts in, looking forward to the event, anybody feel free to come and have a look or a chat
Chris.

SAM_1067.JPG
SAM_1067.JPG (52.03 KiB) Viewed 11920 times


SAM_1068.JPG
SAM_1068.JPG (49.71 KiB) Viewed 11920 times

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » October 21st, 2011, 4:27 pm

O.K.been busy all week, here's a peek before Gaydon, with the Tess pilot :D

SAM_1076.JPG
SAM_1076.JPG (65.27 KiB) Viewed 11852 times

Simon Wright
Posts: 75
Joined: December 5th, 2008, 8:40 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby Simon Wright » October 21st, 2011, 6:10 pm

Very nice
LMA2345 now that should be easy to remember!

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » October 22nd, 2011, 11:08 am

Thanks Simon, yes she's a good girl :D Next job will be to wet and dry all that green off back to the primer for a flat finish ready for the big paint job. :?

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: 102 inch Focke Wulf 190

Postby stewart clifford » November 10th, 2011, 11:25 pm

chris willis wrote:Thanks Simon, yes she's a good girl :D Next job will be to wet and dry all that green off back to the primer for a flat finish ready for the big paint job. :?


Come on Willy, wheres the new pics, apparently this model is now ready for surface detail and is as smooth as ten smooth things in a smooth thing competition.

stewart clifford
Posts: 590
Joined: January 25th, 2009, 10:04 am
Location: Weston , Hert's
Contact:

Re: 102 inch Focke Wulf 190

Postby stewart clifford » November 10th, 2011, 11:26 pm

chris willis wrote:O.K.been busy all week, here's a peek before Gaydon, with the Tess pilot :D

SAM_1076.JPG


Tess, checking for any "Ruff" edges :)

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » November 11th, 2011, 8:01 am

Fighter boy becomes a comittee member and you cant shut him up, Gregg marrying Nigel is funny though :D

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » November 18th, 2011, 4:17 pm

All the green dust cover of paint has now been flatted back, panel lines sprayed in, and one side of the fuselage now has many rivets burnt in :D

SAM_1139.JPG
SAM_1139.JPG (53.82 KiB) Viewed 11624 times

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » November 22nd, 2011, 7:50 am

Colour scheme sorted. Yellow 14

14.jpg
14.jpg (45.26 KiB) Viewed 11569 times

Mike Booth
Posts: 648
Joined: December 4th, 2008, 5:51 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby Mike Booth » November 22nd, 2011, 10:33 pm

When you come to Chocky's Winter Warmer, I can lend you an exact colour chart with samples for RLM colours.
Clearly the tail probably from another aircraft in light blue bolted onto an F8 in late war scheme colours .
Probably Fus grey 75. Green 82 over sprayed with Brown 81. Yellow 04 and tail section in good old 76.
Nice heavy metal.

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » November 23rd, 2011, 3:46 pm

Correct Chocky, got the colours from hyperscale with this model, :D not long till the winter warmer.

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » January 2nd, 2012, 1:47 pm

The Fuselage is now ready to paint, so starting with the rudder.

SAM_1222.JPG
SAM_1222.JPG (59.23 KiB) Viewed 11291 times

chris willis
Posts: 519
Joined: July 2nd, 2009, 12:44 pm
Contact:

Re: 102 inch Focke Wulf 190

Postby chris willis » January 5th, 2012, 5:35 pm

Blisters now made from Chemiwood, and fitted into position.

SAM_1227.JPG
SAM_1227.JPG (43.77 KiB) Viewed 11211 times


Return to “Your New Projects”

Who is online

Users browsing this forum: No registered users and 23 guests