Twin electronic ignition

[barrie burton]

I have a twin electronic ignition unit that was used in a now defunct twin.I want to use it on a single cylinder engine.Can I simply use one lead only or do I have to put an unused plug in the second lead? Thanks in advance

Barrie Burton

[paul hughes]

hobbyking do a replacement unit for £23. is it worth messing about?

http://www.hobbyking.com/hobbyking/stor ... ouse_.html

[Peter Clare]

Octopus RC also list a good range, I've had good service from them. But stick with the RCEXL brand
(not the XYZ ignition ).

[John Greenfield]

Hi Barry

to answer your original question, you will have to put a plug in the unused cap or you will damage the ignition. The problem then is you will have an unshielded spark somewhere on your model and even 2.4 ghz radio does not like that.

John

[barrie burton]

Thank you folks.It looks as if I am being directed along the route of spending some money.

Barrie B

[ian redshaw]

Hi Barry, I have a couple of CH single cylinder ignition units and sensors that I don't need, if they are of use PM me your address and I'll post them off foc, they aint no use to me.

Cheers, Ian.

[Denis Brown]

Thats a very nice gesture

[barrie burton]

Many thanks Ian,I have sent you a PM,you should also have received info on silencer design via a previous PM

Keep designing,building and flying,we are a diminishing breed

Barrie B

[ian redshaw]

Thats a very nice gesture

Do unto one......... and all that guff!!

Posted Barrie, hope it is of use!

Ian.

[barrie burton]

Many thanks Ian,I will let you know the results.

Barrie B